VMware 2V0-33.22PSE VMware Cloud Professional Exam Practice Test

Page: 1 / 14
Total 126 questions
Question 1

A cloud administrator wants to enable administrator wants to enable Enterprise Federation to the Cloud Services Portal in order to be able to authenticate with the on-premises Active Directory. The Administrator Already deployed the on-premises VMware Workspace One Access Connector. Through which port does the Cloud Service Portal communicate with Workspace ONE Access Connector?



Answer : C

https://docs.vmware.com/en/VMware-Workspace-ONE-Access/20.10/workspace_one_access_install/GUID-E81B6B1B-A3D1-40D0-806A-3D31502C53A5.html

The Cloud Services Portal communicates with the Workspace ONE Access Connector via port 443 (HTTPS). According to the VMware documentation[1], the Cloud Services Portal connects to the Access Connector on port 443 to authenticate users and authorize access to the cloud service. The Access Connector listens on port 443 and communicates with the Active Directory using LDAP over TLS (LDAPS) on port 636. Reference:https://docs.vmware.com/en/VMware-Workspace-ONE-Access/services/com.vmware.access.admin.configure.doc/GUID-F5C6FD9E-36DA-4B1F-A7E7-CF8F64A81D78.html


Question 2

A cloud administrator is tasked with migrating workloads from an on-premises environment to a VMware Cloud on AWS software-defined datacenter (SDDC) with no downtime while retaining their IP Address. Which connectivity type should be used?



Answer : D

Private L2 VPN:To migrate running VMs between SDDCs in different geographical locations.

You use a private layer 2 (L2) VPN to extend an on-premises network to your cloud SDDC. This extended network is a single subnet with a single broadcast domain.

You can use L2 VPNs to migrate VMs to and from your cloud SDDC, for disaster recovery, or for dynamic access to cloud computing resources (often called cloud bursting).

VM migrations across an L2 VPN support VLAN tagging and GENEVE frame encapsulation when migrating between a cloud SDDC to another SDDC.

The L2 VPN tunnel extends layer 2 networks across geographic sites. VMs can move across sites (using vSphere vMotion) and keep the same IP addresses using an L2 VPN.


Question 3

A cloud administrator successfully configures a policy-based VPN between an on-premises data center and an instance of VMware Cloud Software-defined data center (SDDC). Although the workloads are reachable from both locations over the IP network, the cloud virtual machines cannot access an on-premises web service. What should the cloud administrator check first to resolve this issue?



Answer : B

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-586C053D-9553-461E-B6A8-FF508C8F091C.html


Question 4

A cloud administrator is using VMware HCX to migrate application workloads between an on-premises data center and a VMware Public Cloud (UI!) capability of VMware HCX is being used to extend a number of on-premises network segments into the cloud to avoid IP re-addressing concerns. When the cloud administrator tries to extend a native layer 2 network segment from the cloud back into the on-premises data center. an error is encountered and the extension fails. What should the administrator do to enable network extension from the cloud side to on-premises in this scenario?



Answer : B

The best solution for enabling network extension from the cloud side to the on-premises data center in this scenario is to ensure that the on-premises environment has at least a VMware vSphere Distributed Switch with version 6.5 configured. This will enable the reverse L2E feature, which is necessary for extending the native layer 2 network segment from the cloud back into the on-premises data center. For more information on how to configure reverse L2E and extend a network segment from the cloud to the on-premises data center, please refer to the official VMware documentationhere.


Question 5

Which two use cases can be met with VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts? (Choose two.)



Answer : C, D

The two use cases that can be met with VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts are Option C: Applications needing local data processing and/or low latency integrations, and Option D: Critical workloads that use restricted data.

VMware Cloud on Dell EMC and VMware Cloud on AWS Outposts both provide local data processing and low latency integrations, making them ideal for applications that require quick and efficient access to data. Additionally, the highly secure infrastructure of both solutions make them a great choice for critical workloads that use restricted data.

For more information, please refer to the official VMware documentation on VMware Cloud on Dell EMC: https://www.vmware.com/products/vmware-cloud-on-dellemc.html And the official VMware documentation on VMware Cloud on AWS Outposts: https://www.vmware.com/products/vmware-cloud-on-aws-outposts.html


Question 6

Which two components are required in order to deploy a Tanzu Kubernetes Grid Cluster in VMware Could environment? (Choose two)



Answer : C, D

https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid/1.6/air-gap-reference-architecture/GUID-deployment-guides-tkg-vsphere-vds-airgap.html


Question 7

Which software development challenge can a cloud administrator address by adopting a cloud operating model?



Answer : A

https://blogs.vmware.com/management/2021/10/introduction-to-vmware-cloud-operating-model.html


Page:    1 / 14   
Total 126 questions