HP HPE0-S58 Exam Practice Test Instant Access

Question 1

Which approach should an integrator take to efficiently configure a 10-frame Synergy environment that has been fully populated with compute nodes?

AManually configure a compute node, and use Composer to extract its configuration to a server profile template. Use Image Streamer to automatically create and assign server profiles from the new server profile template.

BManually configure one compute node, and use Composer to extract its configuration to a server profile template. Use Composer to create and assign server profiles from the new server profile template.

CUse the Synergy planning tool, and select the output to a CSV file option. Import the CSV file into Composer to automatically create and assign server profiles.

DUse an external editor to add relevant settings to a CSV file. Create a Powershell script to use the output from the editor to automatically create and assign server profiles.

Answer : B

Question 2

A customer is planning to deploy OneView for vCenter Server to improve management procedures for growing virtualization environment. The customer is concerned about resources required by HPE OneView for vCenter Server.

Which statement about deploying HPE OneView for vCenter Server is true?

AIt is deployed as an application on the Windows Server machine with at least 48GB of memory.

BIt is deployed as a part of the HPE Composer installation.

CIt is deployed as a virtual machine on the supported hypervisor.

DIt can only be deployed if HPE Global Dashboard is already installed.

Answer : C

https://support.hpe.com/hpsc/doc/public/display?docId=a00047122en_us

Question 3

Using a laptop, how can an integrator perform the initial setup on an HPE Synergy 12000 Frame?

AConnect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with VNC to the address 306.025 port 5900.

BConnect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of 192.168.10.1, port 5900, and connect to the HPE Synergy console with a web browser.

CConnect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with a web browser to the address 192.168.10.1, port 5900.

DConnect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of 192.168.10.1, port 5900, and connect to the HPE Synergy console with VNC.

Answer : D

https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c05348240-6.pdf (88, 89)

Question 4

Which HPE Synergy D3940 storage module configuration is valid?

Aa single RAID set to be shared across the SAS fabric to multiple compute nodes as a virtualization host datastore

Bmaximum of three HPE Synergy D3940 storage modules per frame to be used by any compute module within the management ring

Cany number of the drives from storage module to be mapped to any single compute node

Da pair of disks to house Composer backups and Synergy firmware bundles

Answer : A

Question 5

During a first-time installation of HPE Synergy, an external monitor is not available to the integrator.

Which approach should the integrator take to perform the first-time setup?

ADownload MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.

BDownload VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.

CDownload Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.

DDownload PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).

Answer : B

Question 6

A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single management tool.

How should the integrator set up the management of the datacenter?

AAdd two frames from the remote datacenter as remote enclosures using existing Composer

BInstall one Composer in every frame in both local and remote datacenter

CDeploy one Composer in each site and link them together

DConnect the management links with fibre cables if the distance between datacenters is more than 500m

Answer : A

Question 7

A customer is unable to boot to a 3.5TB volume created and presented to a compute node.

What is likely preventing the boot?

AThe system is set to UEFI instead of Legacy Boot mode

BThe system is set to Legacy Boot mode instead of UEFI

CBoot volumes larger than 2.2TB are not supported on Synergy

DBoot volumes larger than 3TB are not supported on HPE Synergy

Answer : B

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05351907

HPE0-S58 Implementing HPE Composable Infrastructure Solutions Exam Practice Test